Below you can find an ever evolving and growing catalog of finishes Pivot can provide. This is by no means our entire list of finishes but it is a good place to start.
We have done our best to show images which look true to life. This being said we have no control over the calibration of the monitor in use. Also, these finishes may look different based on the varied lighting on any particular site.
Note: Before specifying a finish for any particular job, take the site into consideration. While metal is durable and if cared for properly can last for many many years, the finish can be quite fragile. Feel free to contact us if you have any questions or concerns about a potential project. A couple of examples of finish metal being set up for failure: 1) Mild steel in restrooms or kitchens. Due to the nature of these areas mild steel should be avoided if possible. Over time it WILL rust. The finish can be prolonged with a durable clear coat but is not recommended. 2) Wall paneling which terminates at or near the floor. Vacuum cleaners and mops tend to damage the lower areas either by rubbing the finish away, or eventually corroding the material.
